- 1. Could Not Find Disk For /volumes/os X Base Systems
- 1. Could Not Find Disk For /volumes/os X Base System Erase
- 1. Could Not Find Disk For /volumes/os X Base System Pdf
- 1. Could Not Find Disk For /volumes/os X Base System Disk Image Download
- Mar 05, 2018 How do create bootable dvd of OS’s I’m using High Sierra OS but all video of how to seem to be for older machine not same disc utility. I need do all 8 OS and use machine high Sierra to create I want to archive them in case I ever need them or buy old machine and do it up even restore machines.
- @@ -0,0 +1,327 @@ #! /bin/sh # Preparation script for an OS X automated installation for use with VeeWee/Packer/Vagrant # What the script does, in more detail: # 1. Mounts the InstallESD.dmg using a shadow file, so the original DMG is left # unchanged. Modifies the BaseSystem.dmg within in order to add an additional 'rc.cdrom.local'.
- Unmount the disk image that mounted automatically in 3), which should be named 'Install macOS Sierra'. Convert the disk image to a loadable virtual drive image (by using the command provided in Step 1.11) hdiutil convert '/tmp/Sierra.cdr.dmg' -format UDTO -o '/tmp/Sierra.iso' then here you go.
Jun 21, 2016 changed the steps to do this. First, erased the previous installer, with Disk Utility and the did the whole process. Working fine. Must have been a hiccup after updating to 10.12.3.
Home > Articles > Apple > Operating Systems
␡- Exercise 4.1: Use OS X Recovery
< BackPage 4 of 6Next >
From the book Apple Pro Training Series: OS X Support Essentials 10.9: Supporting and Troubleshooting OS X Mavericks
Apple Pro Training Series: OS X Support Essentials 10.9: Supporting and Troubleshooting OS X Mavericks
Exercise 4.1: Use OS X Recovery
Prerequisite
Your computer must have a local hidden Recovery HD partition. This partition is normally created by the OSÂ X Mavericks installation process.
In this exercise, you will start up your computer in OS X Recovery. OS X Recovery is stored on a hidden partition named Recovery HD that is created automatically when OS X is installed on the hard disk. You will review the included utilities as well as how OS X Recovery can reinstall the system itself.
Start Up Using OS X Recovery
To access the Installer and other utilities in OS X Recovery, you need to start up from the hidden Recovery HD partition.
- If your computer is on, shut it down by choosing Shut Down from the Apple menu.
- Press the power button on your computer, and then hold down Command-R until the gray Apple logo appears on the screen.
- If a language selection screen appears, select your preferred language, and click the right-arrow button.
- After OS X Recovery starts up, you see a Mac OS X Utilities window. This window is the primary interface for OS X Recovery.
When you hold down Command-R during startup, the computer attempts to start up using a recovery partition on the hard disk.
If no recovery partition is available, Mac computers with newer firmware can actually start up from an Apple server over the Internet and get access to the OS X Recovery features.
If your computer starts up to the login screen instead of OS X Recovery, you may not have held Command-R long enough. If this happens, click the Shut Down button and try again.
If your computer displays a globe icon with the text “Starting Internet Recovery. This may take a while,” your computer was unable to find a local Recovery partition. If the Recovery partition exists, you can shut down your computer by holding the power button for 10 seconds, and then select the Recovery partition using the Startup Manager (see the instructions in Exercise 4.2, in the “Test the OS X Recovery Disk” section). If your computer does not have a Recovery partition, you can let it finish starting into Internet Recovery, and then proceed with this exercise.
If you see a Welcome screen instead, you probably pressed Command-R too late or did not hold it down long enough. You can start over by pressing Command-Q and then clicking the Shut Down button.
Examine the Utilities Available in OS X Recovery
While running OS X Recovery, you have access to some utilities for recovering, repairing, and reinstalling OS X. In this part of the exercise, you will familiarize yourself with some of these utilities.
View Help for OS X Recovery
You will use Safari to view the built-in instructions of OS X Recovery and to browse the web.
- Select Get Help Online, and then click Continue.
- Click the Apple bookmark.
- If Safari displays a message that says “You are not connected to the Internet,” you can join a wireless network using the Wi-Fi icon near the right side of the menu bar.
- If you are prompted to unlock the Login keychain, leave the Password field blank, and click OK.
- Click the Support link near the top right of the page.
- From the menu bar, choose Safari > Quit Safari (or press Command-Q) to return to the main utilities screen.
Safari opens and displays a document with information about how to use OS X Recovery. Take a moment to skim the document.
This document is stored on the Recovery HD partition, but as long as you have an Internet connection available, you can also use Safari to view online documentation such as the Apple Support articles.
Safari now displays the Apple website.
You are taken to the support section of the Apple site. If you were experiencing a problem with your computer, this would be a good place to look for solutions and information. You will use some of the Apple support resources later in this guide.
Note that closing the Safari window does not actually quit Safari. This is common among Mac applications, but if you are accustomed to using Microsoft Windows it may be contrary to your expectations. Generally, the best way to quit a Mac application is to choose Quit <Application Name> from the application menu (the menu next to the Apple menu, named for the current application); or you can use the keyboard shortcut Command-Q.
Examine Disk Utility
Disk Utility is provided in OS X Recovery to allow you to repair, image, reformat, or repartition your computer’s disk.
- Select Disk Utility, and then click Continue.
- Select the entry that represents your startup volume. Typically, it is named Macintosh HD.
- Select the entry that represents your disk (just above the startup volume).
- Quit Disk Utility by choosing Disk Utility > Quit Disk Utility or by pressing Command-Q.
In the Device List on the left, you will see your disk device and a Mac OS X Base System disk image. Note the primary entry for each physical disk device and an indented list of volumes on each device (discussed in more detail in Lesson 10, “File Systems and Storage”).
Notice the options available to perform on the volume: First Aid, Erase, RAID, and Restore. Among the reasons Disk Utility is provided in OS X Recovery is to allow you to verify or repair the startup volume’s file structure, or if necessary to erase the volume before reinstalling OS X.
Notice that the Partition option is now available.
You are returned to the main utilities screen.
Examine Time Machine Restoration
If you backed up your computer with Time Machine, OS X Recovery has the capability to do a full system restoration from that backup. Setting up Time Machine is covered in Lesson 17, “File Archives.”
- Select Restore From Time Machine Backup, and then click Continue.
- Click Continue.
- Click Go Back to return to the Restore Your System screen.
- Click Go Back again to return to the main utilities screen.
A page of notes on the restoration process appears. It is important to note that this restoration interface will erase all current data and replace it from the backup; other restoration interfaces that let you control which files or folders are restored are examined later.
The “Select a Backup Source” screen appears. If you had configured a Time Machine backup target, it would be available here as a source for restoring your system. Time Machine is discussed in more detail in Lesson 18, “Time Machine.”
Examine the OS X Installer
Now you will examine the reinstallation process, but you will not perform the installation. By going through the following steps, you can experience the configuration of an installation without actually waiting for the OS X software to be copied to your system.
- Select Reinstall OS X, and then click Continue.
- Click Continue.
- Click Continue.
- At the license agreement, click Agree.
- In the license confirmation dialog, click Agree again.
- Quit the Installer.
The OS X Mavericks installer opens.
A dialog appears indicating that this computer’s eligibility will be verified with Apple.
The OS X installer displays a list of partitions where you could install or reinstall OS X.
Verify Your Startup Disk and Restart
The Startup Disk utility allows you to select the volume from which to start up. If you are having problems during system startup from your computer’s internal disk, you could connect a second disk with OS X installed, and use Startup Disk to configure the computer to start up from the new disk.
- From the Apple menu, choose Startup Disk. Notice that Startup Disk shows you a list of all startup volumes. Available options may include Network Startup or one or more NetBoot images, depending on what Startup Disk finds on your network.
- Verify that your computer’s normal startup volume (typically named Macintosh HD) is selected; if necessary, select it.
- Click Restart.
- In the confirmation dialog, click Restart.
You could also restart without using the Startup Disk utility by choosing Apple menu > Restart.
Related Resources
- Book $55.99
- eBook (Watermarked) $55.99
- Web Edition $55.99
Home > Articles > Apple > Operating Systems
␡- Reference 4.1: Startup from OS X Recovery
Page 1 of 6Next >
In this lesson from Apple Pro Training Series: OS X Support Essentials 10.9: Supporting and Troubleshooting OS X Mavericks, you will learn how to access OS X Recovery both on new Mac computers that came with OS X preinstalled and on systems that were upgraded to OS X Mavericks; explore the utilities available from OS X Recovery; and learn how to create external OS X recovery disks that can be used in cases where the local Recovery HD system isn’t available.
From the book Apple Pro Training Series: OS X Support Essentials 10.9: Supporting and Troubleshooting OS X Mavericks
Apple Pro Training Series: OS X Support Essentials 10.9: Supporting and Troubleshooting OS X Mavericks
Goals
1. Could Not Find Disk For /volumes/os X Base Systems
- Access the utilities available in OS X Recovery
- Reinstall OS X from OS X Recovery
- Create external recovery disks
From a troubleshooting viewpoint, one of the most useful OS X features is the OS X Recovery system. Via OS X Recovery, you can not only reinstall OS X but also access a variety of administration and troubleshooting utilities. OS X Recovery replaces functionality previously accessed via an OS X installation DVD. The primary difference is that the OS X Recovery system is, by default, located on the primary system disk. This allows easy “anytime” access to recovery utilities without the need for additional media.
In this lesson, you will learn how to access OS X Recovery both on new Mac computers that came with OS X preinstalled and on systems that were upgraded to OS X Mavericks. You will also briefly explore the utilities available from OS X Recovery. As long as you don’t make any permanent changes using the utilities in OS X Recovery, you can safely explore without damaging your primary OS X system. Finally, you will learn how to create external OS X recovery disks that can be used in cases where the local Recovery HD system isn’t available.
Reference 4.1: Startup from OS X Recovery
Mac systems running OS X Mavericks, including both systems that shipped with OS X Mavericks and upgraded systems, include a hidden OS X Recovery system on the local system disk. To access this copy of OS X Recovery, simply restart the computer while holding down Command-R. Once the OS X Recovery system fully starts, the OS X Utilities window appears. From there you can install (or reinstall) OS X and choose from a variety of maintenance applications.
If for some reason OS X Recovery doesn’t start or isn’t installed on the local system disk, there are three alternatives for accessing it:
- If you have a Mac model released in mid-2010 or later—If your Mac computer has the latest firmware updates, it’s capable of accessing OS X Internet Recovery. If the local OS X Recovery system is missing, late-model Mac computers should automatically attempt to access OS X Internet Recovery. You can also force a system to start up to OS X Internet Recovery by holding down Command-Option-R. When your late-model Mac computer starts from OS X Internet recovery, it attempts to redownload the OS X Recovery system from Apple servers. If successful, this process re-creates the local Recovery HD partition.
- If you have an external OS X recovery disk—Connect the recovery disk to your Mac computer, and restart while holding down the Option key. This opens Startup Manager, where you can use the Arrow and Return keys or the mouse and trackpad to select the OS X recovery disk. Reference section 4.3, “External OS X Recovery Disks,” covers this topic in greater detail.
- If you have a local Time Machine backup disk—The Time Machine backup service automatically creates a hidden OS X Recovery system on local backup disks. To access this system, connect the Time Machine backup disk to your Mac computer, and restart while holding down the Option key. This opens the Mac computer’s Startup Manager, where (as above) you can use the Arrow and Return keys or the mouse and trackpad to select the Time Machine backup disk. Lesson 18, “Time Machine,” covers this topic in greater detail.
MORE INFO ▶ For more about using OS X Internet Recovery, see Apple Support article HT4718, “OS X: About OS X Recovery,” and article HT4904, “Computers that can be upgraded to use OS X Internet Recovery.”
Related Resources
1. Could Not Find Disk For /volumes/os X Base System Erase
- Book $55.99
1. Could Not Find Disk For /volumes/os X Base System Pdf
- eBook (Watermarked) $55.99
1. Could Not Find Disk For /volumes/os X Base System Disk Image Download
- Web Edition $55.99